Fits Ford Ranger · 5 ft Bed
Autobull Soft Tri-Fold Tonneau Cover — Ford Ranger
A PVC top over an alloy steel structure, built for the Ford Ranger’s 5 ft bed. Lighter and lower-cost than the hard top style, with the same locking clamps and weatherstripping standard. Mounts with bed rail clamps — no drilling required.
Shop This CoverOverview
This soft tri-fold cover is built for the Ford Ranger’s 5 ft bed, using an alloy steel structure with a PVC vinyl top stretched over it. It’s among the lightest styles in the Autobull lineup and easy to remove entirely if you want the bed fully open for a big load.
Release the side latches and the top rolls back toward the cab, giving you full bed access in seconds. Locking clamps and weatherstripping are standard, the same as on our hard top covers — you’re not giving up security or weather protection to get the lighter weight and lower price.
Fitment note: This cover is built for the standard Ranger bed rail. It does not fit trucks with an aftermarket bed liner that raises the rail profile beyond factory spec.
Built From
Alloy Steel Structure
The frame and support structure underneath the vinyl top, consistent across the Autobull lineup.
PVC Vinyl Top
A durable vinyl top stretched over the frame, held taut by a tensioning system.
Weather Stripping
Rubber seal strips along the rail and tailgate contact points to reduce water intrusion.
Locking Clamps
Key-locked bed rail clamps for basic theft deterrence on the closed cover.
Confirming Your Ford Ranger’s Fit
Bed length has to match exactly for the frame to tension correctly. This cover is built for the Ford Ranger’s 5 ft bed — check your bed length on the door jamb sticker or in your owner’s manual before ordering, since Ranger bed length is consistent across trims but liner setups can vary.
How Installation Works
- Clean the bed rails. Wipe down the factory rail where the frame clamps will sit.
- Assemble the frame. Snap or bolt the side rails together per the included instructions.
- Clamp to the bed rails. Hand-tighten the included clamps, then torque them down evenly.
- Attach the vinyl top. Snap the top onto the frame and adjust the tensioning system.
- Test the latches. Roll the top open and closed, checking that the side latches engage cleanly.
Specifications
Why This Cover
- Alloy steel structure and PVC top at a lower price than premium soft cover brands
- Locking clamps standard, not sold as an add-on
- Rolls back toward the cab in seconds for full bed access
- Rail clamp mounting means no drilling into the F-150’s bed
- Lightest cover style in the Autobull lineup
Frequently Asked Questions
Does this fit the 2019–2024 Ranger?
Yes, this cover is fitted for Ranger model years 2019–2024 with the standard 5 ft bed. Check your bed length on the door jamb sticker if you’re unsure.
Will this fit with an aftermarket bed liner installed?
It depends on the liner. Standard drop-in and spray-in liners typically don’t affect fitment, but a liner that raises the rail profile beyond factory spec may interfere with the clamp mount.
Can I install this by myself?
Yes. It ships as a rolled vinyl top with a separate frame kit, and mounts with included rail clamps — most owners complete the install solo in under an hour.
Does it come with a lock?
Yes, the side latch straps include a locking mechanism standard, not as a separate purchase.
What if a seal or latch wears out?
Seal kits and latch kits are sold separately in our Accessories lineup, so a worn part doesn’t mean replacing the whole cover.
Ready to Cover Your Ford Ranger Bed?
Alloy steel structure, PVC top, no-drill mount — fitted to your exact truck.
Shop This Cover